NDCM 100-NET
netDIMM CPU Module NET
 The netDIMM is industrial communication technology with the network controller netX based on the
well-known DIMM-PC format. Or the easiest solution to build up devices of automation with fieldbus
technology and Real-Time-Ethernet.
The netDIMM module comes with memory, oscillator, reset generator and DC/DC converter. Only the
physical interface for Ethernet or fieldbus application has to be provided externally.
It is available as a HMI version and has on-board LCD and Touch controller. To design a machine terminal
turns into an easy task, because together with Windows CE or Linux the netDIMM module enables
soft-keys, SD/MMC-Card and USB interface.
優點
- netX 100，集成ARM 926EJ-S / 200MHz
- 4 MB SPI Flash / 8 MB SDRAM
- USB
- UART
- SPI接口
- 2個實時以太網端口，集成Switch和Hub
- EtherNet/IP, EtherCAT, SERCOS III, Powerlink, PROFINET
- 現場總線控制器 支持CANopen, DeviceNet, PROFIBUS / MPI
- 板級支持包 支持Windows CE, Linux, VxWorks, rcX實時內核
- DIMM-PC標準尺寸
| 產品
| 
| NDCM 100-NET |
| 描述 |
|
netDIMM CPU Module NET |
| |
| |
| CPU |
|
基于ARM926EJ-S的netX，系統時鐘200MHz |
| 存儲設備 |
|
4 MB Flash
8 MB SDRAM |
| 接口 |
|
USB 1.1接口
3個UART 或16個GPIO
JTAG
SPI |
| AD轉換器 |
|
2x 2通道
S&H
10位
1MS/S |
| 2個以太網端口 |
|
10BASE-T/100BASE-TX，集成PHY，IEEE 1588
EtherCAT，具有3個FMMU和4個SyncManager
EtherNet/IP
Powerlink，集成Hub，響應延遲最大1μs
PROFINET，集成Switch |
| 現場總線控制器 |
|
CANopen
DeviceNet
PROFIBUS |
| 擴展 |
|
雙端口內存
擴展總線或52個IO |
| 尺寸（L x W x H） |
|
67.6 x 40 mm，DIMM標準 |
| 操作溫度 |
|
-25 ... 55° C |
| 操作電壓 |
|
3.3 V / max. 750 mA |
|
|
產品樣本
|
